Lifesaver WAYFARER, Руководство пользователя

Страница: 6 / 16

6
NORMAL
USE
1. Attach Scavenger In Hose to the ‘IN’ spigot.
2. Drop the pre-filter into the water. The cleaner the water, the longer your filter will last.
Note: The float above the pre-filter should be adjusted so that the pre-filter
remains submerged but does not sit on the bottom of a river bed / pond
where it may draw in silt or sand.
3. Attach Out Hose to the ‘OUT’ spigot. Place the other end into your container.
4. Pump the pump handle up and down for an instant flow of purified water.
5. Ensure your scavenger hose is always submerged. If you pump air into
the unit the flow rate will slow and the pump will become difficult to use.
Operate the Pressure Relief Valve (PRV) as per page 7 to overcome this.
Do not operate the pump when the Scavenger In Hose and pre-filter is not fully submerged
as you will fill your Wayfarer
™
with air that will need to be removed using the PRV.
2 1
4
3
Do not allow your UF Cartridge to dry out. If the hollow fibre membranes dry out,
the system will shut down. This is not covered under your warranty and you will
need to purchase another UF Cartridge.