Not everyone can afford to hire a personal trainer or a team of professionals
to help them feel and look their best. But the good news is: you don’t have
to. Lifepro brings the gym to you.
The Lifepro VividPro boosts your metabolism and increases circulation,
which forces your body to burn more fat and reduces the appearance of
cellulite. The powerful lateral motor creates a high-frequency vibration that
works all of your muscles at once—in far less time than a typical workout. 10
minutes is all it takes to complete a full workout with your VividPro.
If you have suffered an injury or you experience joint or back pain,
find relief and help prevent future injuries by adding the vibration plate
to your rehab routine. Vibration plates are used by professional athletes,
physical therapists, and rehabilitation centers everywhere.
Experience joint- and back-pain relief:
improves back and core
strength
Boost your metabolism:
encourages your body to burn fat faster
Decrease your stress:
increases serotonin and decreases cortisol
Improve circulation:
decreases blood pressure and improves
lymphatic drainage.
Increase strength & flexibility:
improves stability
Develop stronger bones:
increases bone density
Check out the exercises in this manual for ways to get started using your
VividPro. Next, be sure to visit our website
vividpro.lifeprofitness.com
for
access to our
which demonstrate how to
easily incorporate the VividPro into your fitness routine.
ACTIVATE THE REMOTE
• Remove the remote from the silicone shell
holding it to the wristband.
• Remove the back of the remote.
• Remove the round plastic insert under
the CR2032 3V battery.
• Replace the battery and the back of
the remote.
• Re-insert the remote into the silicone shell.
ATTACH THE TWO RESISTANCE BANDS
The resistance bands allow you to incorporate
strength training into your workout.
• Loop the end of a resistance band
through one of the metal rings under
the front edge of the VividPro.
• Thread the resistance band handle
through the loop and pull tight.
• Attach the second resistance band to
the metal ring on the opposite side.
CONNECT TO POWER
• Plug the power cord firmly into the insert on the side of the unit.
NOTE:
Press forcefully until you feel a click, which indicates that the cord is
securely connected. The power cord fits tightly so it will not loosen during use.
• Plug the power cord into an AC outlet.
POWER ON THE VIVIDPRO
• Flip the breaker switch on the side of the VividPro to the
ON position.
Set up your Lifepro VividPro in just 4 easy steps:
3
2
1
4
That’s it. Your VividPro is now ready to use. See OPERATING INSTRUCTIONS
and CHOOSING A PROGRAM on the next pages for details.
6
VividPro User Manual Lifepro
Re Fitness Collection
7
Remote
Shell
Remote
Remote
Back
Plastic insert
Battery
Wristband
