14
RelaxaVibe User Manual Lifepro
Re Fitness Collection
15
CHOOSING A TRAINING MODE
*Each training mode is listed in the order that they are toggled through when you press the
Mode button (e.g., press the Mode button once to select the Oscillation training mode, press
twice to select Pulsation, press three times to select Lateral, etc.).
SETTING A WORKOUT TIME AND SPEED
The default time for manual workouts is 10 minutes. You can set a custom
workout duration of 1–10 minutes, in one-minute increments, while in standby
mode. Once you start the manual workout, you cannot adjust the workout time.
You may adjust the speed of your manual workout after your workout has
started. The speed for your manual workout will begin automatically at level 1.
Once your workout has begun, you can change your speed at any time, from 1–60.
WORKOUT INTENSITY AND SPEED
During your workout, you can quickly see your
current workout intensity by checking the
LED lights on the sides of the RelaxaVibe or
the Workout Intensity Graph on the control
panel. Workout intensities correspond to the
following speeds and colors.
You can use the RelaxaVibe in program or manual mode. To get the best results,
alternate between the preset programs and custom workouts created in manual
mode to keep your body guessing. Your body tends to adapt to a workout routine
over time, so you want to change up your workouts to keep improving your fitness.
PROGRAM MODE
In program mode, you can select from three preset programs: P1, P2, P3. Each
preset program is 10 minutes long and uses a different training mode to challenge
your body. All three preset programs vary speed and intensity throughout to help
keep you on your toes.
CHOOSING A PROGRAM IN PROGRAM MODE
1. Press the
Power button
to turn the system ON.
2. Press the
Program Mode button
to toggle between the three programs:
P1–P3.
3. Press the
Start/Stop button
on the remote control to activate the selected
program.
NOTE:
Workout time and speed cannot be adjusted for preset programs.
MANUAL MODE
In manual mode, you can create your own custom workout by choosing from
seven training modes (see CHOOSING A TRAINING MODE on the next page)
and then setting a workout time and speed.
CREATING A CUSTOM WORKOUT IN MANUAL MODE
1. Press the
Power button
to turn the system ON.
2. Choose a training mode by pressing the
Manual Mode button
to toggle
through the seven training modes.
3. Set a time duration for your workout:
a. Use the
Set Time buttons
on the control panel or the hands-free remote
control.
2. Press the
Start/Stop button
on the remote control to begin the manual
workout.
3. The speed will automatically begin at level 1. To adjust the speed, use the
Set Speed buttons
on the hands-free remote control.
TRAINING MODES*
MOTOR MOVEMENT
ACTIVE MOTOR
Oscillation
Up-Down
Oscillating Motor
Pulsation
Pulsating
Pulsating Motor
Lateral
Side-to-Side
Lateral Motor
Oscillating Pulsation
Up-Down + Pulsating
Oscillating Motor + Pulsating
Motor
3D/Spiral
Up-Down + Side-to-Side
Oscillating Motor + Lateral
Motor
Lateral Pulsation
Pul Side-to-Side
Pulsating Motor + Lateral
Motor
4D
Up-Down + Pul
Side-to-Side
Oscillating Motor + Pulsating
Motor + Lateral Motor
INTENSITY
SPEED
COLOR
Low
1-20
Green
Medium
21-40
Orange
High
41-60
Red
