USING THE CONTROL PANEL
1. Power Button:
Power the RelaxaTilt on and off.
2. Massage Mode Button:
Toggle through the three massage modes,
A1–A3. The default mode is A1.
3.
Time Button:
Increase or decrease the massage time duration from
5–30 minutes, in five-minute increments. The default time is 15
minutes.
4. Speed Button:
Increase or decrease the speed from L1–L3. The default
speed is L1.
5. Heat Button:
Turn the heat on or off. The default heat setting is off.
The button lights up when the heat is on.
6 . Display Window:
Shows the current massage mode, time, or speed.
10
RelaxaTilt User Manual Lifepro
Re Fitness Collection
11
CREATING A MASSAGE WITH THE RELAXATILT
You can select from three massage modes, A1–A3. Each massage mode
uses a different massage rhythm, direction, and speed.
Use the control panel to begin a massage:
1. Press the
Power button
to turn the system ON. The red power LED
will go from flashing to solid when the RelaxaTilt is powered on. The
massage will begin automatically.
2. Use the
Time button
to toggle through the available massage
durations, from 5–30 minutes, in five-minute increments (5, 10, 15, 20,
25, 30, 5, 10...). The default massage time is 15 minutes. Your selection
appears in the display window and can be adjusted at any time.
3. Press the
Massage Mode button
to select your desired massage mode,
A1–A3. Your selection appears in the display window for a few seconds,
and then the display window shows remaining massage time. Mode A1
is the default. You can change the massage mode at any time.
4. Use the
Speed button
to adjust the massage speed from levels L1–L3.
Your selection appears in the display window, and then the display
window shows remaining massage time. L1, the lowest setting, is the
default. You can adjust the massage speed at any time.
5. Use the
Heat button
to turn the heat on or off at any time. Heat is
off by default. You may turn heat on or off at any time. It takes 3–5
minutes for the heat to reach the full temperature of 104° F.
6. Press the
Power button
to stop the massage at any time. The red
power LED will return to flashing when the device is plugged in but
powered off.
7. The RelaxaTilt will stop automatically when the set working time is
complete. Simply press the Power button to turn the system ON again.
8. Always unplug the RelaxaTilt after each use.
NOTE:
You can adjust time, massage mode, speed, and heat at any time.
MASSAGE INTENSITY AND SPEED
Massage intensity corresponds to the
following speeds:
INTENSITY LEVEL
SPEED
Low
L1
Medium
L2
High
L3
6
5
4
3
2
1
