Lifepro PulseFX, Руководство пользователя

Страница: 6 / 11

Please read the operating instructions before using the PulseFX.
Keep this manual for reference.
CHARGING
• Fully charge your PulseFX for up to 3 hours before using it for the first
time.
• After the first charge, your PulseFX should take between 2 and 3 hours
to charge.
• While charging, the three Battery Indicator LED lights on the PulseFX
handle will flash one by one alternately.
• Full charge is indicated when the Battery Indicator LEDs stop flashing
and remain illuminated.
• The Battery Indicator LEDs indicate the current battery level:
• 3 LEDs lit = 61-100% battery
• 2 LEDs lit = 31-60% battery
• 1 LED lit = 0-30% battery
• Average run-time is 3-7 hours (depending on speed level used).
USING YOUR PULSEFX
1. Slide the Power switch on the handle to the ON position to power on
the PulseFX.
2. The vibration speed will begin automatically at level 1.
3. Press the Speed Selection button to toggle between the 3 speed
levels.
4. At the desired speed, float the head of the massage attachment along
a muscle group. Apply pressure as needed.
5. Slide the Power switch to the OFF position to power off the unit after
each use.
10 PulseFX User Manual Lifepro
REMOVING AND REPLACING
A MASSAGE ATTACHMENT
1. Slide the Power switch on the handle to power OFF the PulseFX.
2. Grab the inserted attachment and firmly pull out to remove it.
3. Insert the stem of a new attachment into the unit and press firmly to
secure it.
4. The spinal massage attachment has a small raised notch which must
line up with the cutout on the nozzle.
SoarFX Collection 11
TIPS FOR USING YOUR PulseFX
• Move the PulseFX over the desired muscle
groups, about 60 seconds per region.
• Apply pressure as needed; however, there
should never be a need to press very hard.
The vibration pulses do all the hard work!
• Use the PulseFX for 15-20 minute sessions,
up to 3 times per day.
• Avoid keeping the massage head in one area
for more than 3 minutes.
• Prolonged application can traumatize tissues.
1
2
3
ADJUSTING THE MASSAGE ARM
1. Press and hold the Arm Rotator button.
2. While holding the button, rotate the massage arm to
1 of 3 positions.
3. Once you hear the arm lock into place, release the
Rotate Arm button.