11
OPERATING INSTRUCTIONS
1 .
Turn the heater on or off by pressing the Power
button on the control panel (C) or by pressing
the ON/OFF button on the remote control (B) .
Once the power is off, heating elements
will stop working first . The fan will continue
working for up to 3 minutes to dispense
residual heat inside the heater . This is a
normal function .
1
ON/OFF
C
B
2 .
Select a heat setting by pressing the MODE
button on either the control panel (C) or the
remote control (B) to toggle between the three
heat settings .
Power for heat-up mode is 1,500 W; heat-
down is 750 W . ECO mode is an economic
energy saving function . When ECO mode is
chosen, the heater will operate to maintain a
constant warm 68°F .
Note:
The ECO LED light will only illuminate
when the ECO function is active and the
ambient room temperature falls below
68ºF / 20ºC .
2
HIGH
LOW
ECO
H / L / E
C
B
3 .
Set the thermostat by pressing the arrows on
the control panel (C) or the remote control (B) .
You can set the temperature on the heater
anywhere between 50°F and 90°F or between
10°C and 32°C . Once you have chosen the
desired temperature, the heater will remain
on until the room temperature increases to
the temperature on the digital display . The
heater will cycle on and off to maintain the
desired room temperature .
Press the °C/°F button on the control panel
(C) to switch the digital display indicator on the
heater between Fahrenheit and Celsius .
3
C
C
B
TEMP.
UP
ºC/ºF
TEMP.
DOWN
OR