Lifepro DynaMini, Руководство пользователя

Страница: 6 / 11

Please read the operating instructions before using the DynaMini.
Keep this manual for reference.
CHARGING
• Fully charge your DynaMini for 2-3 hours before using it for the first time.
• After the first charge, your DynaMini should typically take about
3 hours to charge.
• The Status Indicator LEDs will flash in turn during charging. The LEDs will
stop flashing and all 4 will remain lit when the DynaMini is fully charged.
• The four Status Indicator LEDs also indicate the current battery level:
• 4 LEDs lit = 75-100%
• 3 LEDs lit = 50-75%
• For best results, charge the battery before it reaches 25%.
• When the battery is very low, the unit will stop running and enter battery
protection mode. If this occurs, power off the unit and fully charge it
before using again.
• Average run-time is 3-4 hours per charge at high speed and 5-6 hours at
low speed.
USING YOUR DYNAMINI
1. Press and hold the Power/Speed button on the top of the DynaMini for
2 seconds to power ON the unit. The Status Indicator LEDs will show
the current battery level.
2. Tap (short-press) the Power/Speed button to set the vibration speed to
level 1. The Status Indicator LEDs will show the speed level selected.
a. Tap the button a second time for speed level 2. Tap a third time for
level 3. Tap a fourth time for level 4.
b. Press and hold the Power/Speed button for 2 seconds to power
OFF the unit.
4. At the desired speed, float the head of the massage attachment along a
muscle group. Apply pressure as needed.
5. Always power off the unit after each use.
10 DynaMini User Manual Lifepro
REMOVING AND REPLACING
A MASSAGE ATTACHMENT
1. Press and hold the Power/Speed button for 2 seconds to power OFF
the unit.
2. Grab the inserted attachment and firmly pull out to remove it.
3. Insert the stem of a new massage attachment into the nozzle of the
unit.
NOTE: Make sure the red line on the attachment is lined up with the
corresponding red line on the nozzle.
4. Press the massage attachment in firmly to secure it.
SoarFX Collection 11
TIPS FOR USING YOUR DYNAMINI
• Move the DynaMini over the desired muscle
groups, about 60 seconds per region.
• Apply pressure as needed; however, there
should never be a need to press very hard.
The vibration pulses do all the hard work!
• Use the DynaMini for 15-20 minute
sessions, up to 3 times per day.
• Avoid keeping the massage head in one
area for more than 3 minutes.
• Prolonged application can traumatize
tissues.
• 2 LEDs lit = 25-50%
• 1 LED lit = <25%