Endurance Training Collection
13
12
Dash X User Manual Lifepro
Endurance Training Collection
13
SECURE THE SEAT TO THE
SEAT POST
1. Lay the seat
(9)
on the floor, underside up.
2. Use the multi-tool
(34)
to remove the three flat washers
(10)
and three
nuts
(11)
from the seat.
3. Slide the seat post
(12)
onto the three integrated bolts on the
underside of the seat.
4. Place a flat washer
(10)
onto each bolt.
5. Screw a nut
(11)
onto each bolt.
6. Use the multi-tool to tighten all three nuts.
11
10
9
12
3
ATTACH THE SEAT
TO THE BIKE FRAME
1. Locate the seat knob
(14)
on the seat post insert
(13)
at the top of the
bike frame.
2. Loosen the knob (but do not remove it) by turning it counter-clockwise.
3. Pull the knob head out and slide the seat post
(12)
into the seat post
insert
(13)
. Release the knob head and slide the seat post up or down.
A "click" indicates that the seat post is locked into position.
4. Tighten the knob to secure the seat post by turning it clockwise.
NOTE:
Adjust the seat to your desired height after the bike is fully
assembled. See
on page 20 for instructions.
4
12
14
13
(11)
(10)
x3
x3
TOOLS & HARDWARE
(34)