8
BioRemedy User Manual Lifepro
Wellness Recovery Collection
9
SETTING UP THE BIOREMEDY
• Unfold the BioRemedy Infrared Sauna Blanket and lay it face up on
a flat, sturdy heat-resistant surface such as a bed, floor, or couch.
• Unzip the BioRemedy enough you will be able to easily climb inside.
• You may also unzip the zippered arm holes, if desired.
• Plug the controller connector cable into the connector jack on the
bottom of the BioRemedy.
• Plug the power cable into a standard wall outlet.
PREPARING TO USE THE BIOREMEDY
• Place a couple of bottles of water and any desired entertainment
(such as a tablet, cell phone, or book) within easy reach of the
BioRemedy. You may also wish to grab a pillow to ensure your
treatment session is comfortable.
• Wear clean, comfortable, loose-fitting cotton clothing and socks
that you don't mind getting sweaty.
• Remove your shoes and any metal jewelry or accessories.
• Optional: Wrap one of the included disposable thermal detox wraps
around your body to increase sweating, detoxification, and fat
loss.
• Wrap a towel around your shoulders to keep the heat inside the
BioRemedy blanket and to absorb sweat, if desired.
• Climb into the BioRemedy as you would a sleeping bag.
• Zip up the zippers on the outside of the blanket to keep in the heat.
Your head should be at the top, outside of the BioRemedy blanket.
You may put your arms through the arm holes, if desired.
2
1
4
3
WARNING:
• Do NOT wear metal jewelry or accessories (such as zippers, snaps, or
buttons) while using the BioRemedy.
• Do NOT place the controller on top of the BioRemedy during use. Always
place the controller on the floor or a table beside you.
USING THE BIOREMEDY
• Press the On/Off button to turn on the controller.
• Press the TEMP button to set the desired temperature. It's a good
idea to start with a lower temperature and a shorter treatment
time when you are first using the BioRemedy.
• Press the TIME button to set the desired treatment time. We
recommend starting with 15–20 minute treatments the first few
times you use the BioRemedy.
• Place the controller on a heat-resistance surface next to the
BioRemedy. Placing the controller on the blanket during operation
can damage the blanket or controller.
• Relax and enjoy your treatment session.
• The device will turn off automatically after the set working time
ends.
• Press the On/Off button to power off the BioRemedy at any time if
you wish stop the treatment session before the working time ends.
AT THE END OF YOUR TREATMENT SESSION
• Unzip the blanket and exit the BioRemedy.
• Unplug the sauna blanket.
• Allow the sauna blanket to completely cool (wait at least
30 minutes) before cleaning, folding, or storing.
• Drink plenty of water or an electrolyte drink after your session.
WARNING:
• Drink plenty of fluids before, during, and after use to prevent dehydration.
Staying well hydrated is extremely important. When you are dehydrated,
your body cannot properly cool itself, which can cause heat exhaustion. Heat
exhaustion can lead to heatstroke if left untreated, which can be fatal.
• If you experience any of the following symptoms: confusion, loss of
consciousness, vomiting, dizziness, headache, nausea, fainting, muscle
cramping, elevated heart rate, or rapid breathing, get out of the sauna
blanket immediately and seek medical attention.
