There are several options for hanging your BioHeal from a door standard-
sized door. You may also tilt the light panel toward the area to be treated
using the tilt arm at the back of the panel.
USING THE PANEL'S TILT ARM
1. Place the BioHeal panel on a flat, sturdy floor, table, or other surface.
2. Grab the tilt arm on the back of the panel and pull it out until the panel
is tilted to the desired angle.
HANGING THE BIOHEAL PANEL
INSTALL THE HANGING CABLES
1. Locate the two hanging
screws
(B)
and the two
hanging cables
(C)
.
2. Screw the two hanging
screws into the two screw
holes on the TOP edge of the
BioHeal panel. See
Figure 1
.
3. Screw the threaded
ends of the two cables
onto the top of the
hanging screws. See
Figure 2
.
HANG THE BIOHEAL PANEL FROM A
DOOR (OPTION A)
1. Locate the door hook
(F)
and the
pulley system
(E)
.
2. Place the door hook over the top
edge of any standard-size door.
3. Remove the carabiner from the
rope-end of the pulley system
(not from the end closest to the
pulley).
4. Place both hanging cable loops
through the carabiner. See
Figure 3
.
5. Hang the carabiner over the door
hook. See
Figure 3
.
HANG THE BIOHEAL PANEL FROM THE
PULLEY SYSTEM (OPTION B)
1. Locate the door hook
(F)
and the
pulley system
(E)
.
2. Place the door hook over the top
edge of any standard-size door.
3. Place both hanging cable loops
through the carabiner at the rope-
end of the pulley system. See
Figure 4
.
4. Hang the pulley system from the
door hook. See
Figure 4
.
12
BioHeal User Manual Lifepro
Wellness Recovery Collection
13
Figure 1
Figure 2
Figure 3
Figure 4
