Please read the operating instructions before using the AcuCare Tilt. Keep
this manual for reference.
USING THE REMOTE CONTROL TO OPERATE THE ACUCARE TILT
1. Power/Mode Button:
Press the button to turn the AcuCare Tilt on.
Press again to toggle through the three modes: Mode A (1 LED lit),
Mode B (2 LEDs lit), and Mode C (3 LEDs lit). The default mode is
Mode A. Press and hold for 3 seconds to turn off the unit.
2. Intensity Button:
Press the button to toggle through the four air
pressure intensity settings: low (1 LED lit), medium (2 LEDs lit), high
(3 LEDs lit), and off (no LEDs lit). The default intensity is medium.
3. Heat Button:
Press the button to toggle through the four heat
settings: low (1 LED lit), medium (2 LEDs lit), high (3 LEDs lit), and
off (no LEDs lit). The default heat setting is medium heat. Low heat is
86° F, medium heat is 95° F, and high heat is 104° F.
NOTE:
The LEDs above each button on the control panel indicate the
current selection by the number of LEDs lit.
Heat
Intensity
Mode
USING THE CONTROL PANEL TO OPERATE THE ACUCARE TILT
3
1
5
2
6
7
3
4
1
2
10
AcuCare Tilt User Manual Lifepro
Re Fitness Collection
11
1. ON/OFF Button:
Power the
AcuCare Tilt on and off. The
default massage program will
begin automatically: Mode A is
selected, along with medium
heat, and medium air pressure
intensity.
2. Heat Button:
Toggle through the
four heat settings: low, medium,
high, and off. Medium is the
default heat setting.
3. Mode Button:
Toggle through the
three modes: A, B, C. Mode A is
the default mode.
4. Intensity Button:
Toggle through
the four air pressure intensity
settings: low, medium, high,
and off. Medium is the default
intensity level.
5. Angle Button:
Activate the swing
function. The swing function
is on by default and moves the
body of the massager forward
and back during the massage.
6. Suspend Button:
Turn the swing
function off. This stops the
massager mid-swing at your
desired angle.
7. Reset Button:
Reset the angle of
the massager to its fully upright
position.
