TROUBLESHOOTING GUIDE
Fan does not work
•
Power cord is not
plugged or not properly.
• The "On/Off" button
on the control panel is
not activated.
• Plug the power cord
properly.
• Press the "On/Off
" button
on the control panel.
• Follow the steps in cleaning
the dust filter and cooling
pad.
• Unplug the unit, refill the
tank with clean tap water.
• Dust accumulates on
the dust filter and cooling
pad.
• Water level in the tank
is below "MIN" level.
The temperature
of air being expelled
by the cooler is not
cold enough.
Problem
Possible Cause
Solution
Dust Filter and Cooling Pad
1. First, please use a "+" shaped wrench to remove the 2 nails on the top of the filter.
2. Pull out the dust filter and the cooling pad carefully by hands.
3. Use mild cleaning agent and soft brush in removing the dust and dirt on the filter.
4. Use a clean cloth or soft brush to remove dust and dirt on the cooling pad. Rinse with clean
water if needed and leave open air dry.
Never use any harmful chemical solution for that may cause damage to the pad.
5.
When done, first attach the bottom part of filter and the pad, then push the upper part
into the unit and tighten the 2 nails by wrench.
Warm tip:
Your cooler takes
water from narrow section of the water tank and pumps it on
the cooling pad. The water flowing through the cooling pad goes down to the large section
of the water tank. The cycle results to absorption of dust and dirt in the air which makes the
air safer and fresher to breathe.
8. Remote
Remote control operates with a CR2025 lithium cell.
Direct the remote control to the control panel of the evaporative air cooler. If remote doesn't
work, please check the battery first. Replace it if needed.
If you are not going to use it for a long time, take out the battery
to
prevent damages that
may occur due to battery leakage.
OPERATING THE WATER TANK
Check the level of water in the tank frequently. Be sure that water level is not below the “MIN”
marking which is located on the front of the unit. Activating the “Cooler ” f
unction
with
insufficient amount of water may cause malfunction of the water pump and warranty of your
product will be void.
Before refilling water, please turn your unit off and unplug the power cord.
USING THE ICE BOXES
In order to increase the cooling effect of your fan, you can use ice boxes which are included
with the unit. Before using, place them in the freezing compartment of your refrigerator for a
few hours. Then place them into the large section of the tank and add water reaching “MAX”
level. Utilizing ice boxes drops the temperature of the air flow which will create more effective
cooling
effect.
CLEANING AND MAINTENANCE
Dusts may accumulate in the dust filter or cooling pad afte
r
some time and may affect the
cooler's function. Therefore it is recommended to clean your evaporative cooler regularly.
Below are written steps on how to clean this unit.
Turn off the air cooler and unplug the power cord before beginning to clean.
5
6
