Lifemax BRF712 Скачать руководство пользователя страница 22

21

Warm-Up Instructions

1.  Bring your right hand over your 

right shoulder to the  

upper back and bring your left 

hand under your left shoulder to 

the upper back. 

2. 

Try to reach your fingertips. If 

you are not able to reach your 

fingertips, use a towel as an 

extension of your hands and 

gently pull one hand toward the 

other.  

Reverse arm positions and 

1.  Stand on your left leg and hold 

onto a support with your left 

hand. 

2.  Flex your right leg behind you, 

grasp your ankle or foot with 

your right hand and pull your 

foot toward your buttocks. Keep 

your back straight and right 

knee pointed down.  

Repeat on the other leg.

1.  Place both hands against a wall 

to aid your balance. Press the 

ball of your left foot against the 

wall and keep the heel of the 

same foot rested on the floor 

(make sure your left knee is 

bent). 

2.  Slowly start to straighten your 

left knee and you will feel the 

muscles in your left calf stretch. 

Switch leg positions and repeat.

Shoulder Stretch

Quadriceps Stretch

Calf Twister

QM894

Page 

Содержание BRF712

























Отзывы: