HOW TO USE
The Lifelong Foot and Calf Massager can give you effective foot massage to
your feet, ankles and calves all at the same time.
STEP 1:
Ensure that the device is switched off before plug in
STEP 2:
Put your feet and calves in the black cloth area
STEP 3:
Switch on the device by sliding the switch to ON position
STEP 4:
You can change the settings by clicking on this buttons.
STEP 5:
It has 3 buttons to choose between Vibration & Heat, Manual and
Auto
STEP 6:
The auto mode has 3 preset actions P1, P2 & P3
STEP 7:
Switch to manual mode and adjust heat, vibration and speed on
calves and feet
Dear Customer
Congratulations on your Lifelong Purchase. Our name stands for high-quality
and thoroughly tested products. Please read these instructions carefully
before use.
CLEANING
•
To clean the unplugged device after it has cooled down, wipe with a slightly
dry cloth. However, ensure that water never gets inside the device.
•
The foot cloth can be removed from the zipper and washed separately
INSTRUCTION
•
Ensure that the device is switched off before you plug in.
•
Do not stand on, or exert excessive pressure on the massager, it can slow
down or stop the machine
•
You may feel itchy while use. Do not worry as this is due to improved
circulation
•
Do not use the massager while you’re in the washroom
•
Do not use the massager on wet body, this may cause short circuit or electric
shock
•
Those suffering from cancer, osteoporosis, tumors, high fever or pregnancy
must consult a doctor before use.
•
Do not use the massager when it is in a bad condition
•
Never operate the device especially if there are children in the vicinity.
•
Do not use with animals or pets.
•
Do not cover the massager with the damp cloth when it is in an operating
condition, it may result to a subsequent breakdown or fire
