lifelong LLBC1601 Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 12

lifelong LLBC1601 Скачать руководство пользователя страница 6

TOOLS REQUIRED:

HANDLEBAR AND STEM INSTALLATION:

WARNING:

To prevent steering system damage and possible loss of control, the

“MIN-IN” (minimum insertion) mark (A) on the stem must be below the top of the

Locknut (B) (fig 01).

NOTE:

Remove plastic Cap (E) from the end of the Stem (1)

QUILL STYLE STEM:

1. Insert the Stem (1) into the fork and point the Stem (1) towards the front of the bike.

2. Tighten the Stem Bolt (C) just enough to hold it in position.

Align the stem (1) with the fork and tighten the stem bolt (C) securely.

WARNING:

Do not over tighten the stem bolt. Over tightening the stem bolt can

damage the steering system and cause loss of control.

WARNING:

The Front Brake (28) must be positioned in FRONT of the Fork (4).

WARNING:

To prevent steering system damage and possible loss of control, completely

seat Stem (1) onto Fork Tube (E).

9

10

Multi purpose Spanner

Allen Key

9 mm

9 mm

10 mm

10 mm

13 mm

15 mm

15 mm

15 mm

12 mm

«
...
4
5
6
7
8
...
»

Содержание LLBC1601













Отзывы:

Нет отзывов