• Since the blades are quite sharp, be careful while changing them
• Never pull the cord to take out the plug from the socket
• Always switch off the power supply button before cleaning, emptying or when not
in use.
• For citrus fruits like oranges and sweet limes it is advisable not to use the
plunger so that the seeds pop up automatically. However, for best results cut the
fruit into small pieces and remove the seeds before extracting juice
• Do not use the Liquidizer jar for dry/wet grinding, grating, chopping or mincing
functions.
STEP 4: Now switch on the grinder for operation
Note:
Do not use this jar for wet grinding.
STEP 1: The chutney jar (refer fig 3) is mainly used for
making chutney.
STEP 2: Use small pieces of ingredients for grinding.
Step 3: Put the ingredients in the chutney jar for grinding.
Hold the lid tightly so that it won’t get healed up.
STEP 4: The ingredients should not be too large. Break
ingredients into smaller pieces.
Note:
The lid should be properly pressed.
CHUTNEY MAKING
OVERLOAD PROTECTION
• The overload protector (OLP) is designed to protect the
motor (refer fig 4) from burning.
• In case of an overload, the blade of the jar stops rotating and
the motor gets jammed or starts heating up.
• If such a situation occurs the mixer grinder will automatically
trip off and hence protect the motor.
• Let the motor cool down for a couple of minute. The red
button of the overload protector switch located at the
bottom of the mixer grinder has to be pressed for re-opera-
tion.
• If you have to reset the OLP again and again, try reducing
the quantity of ingredients in the Jar
Overload Protector
5
6
