Lifelines trackit T4, Руководство пользователя

Страница: 31 / 50

USER
MANUAL
29 51285-006
4 Trackit Software - overview
The Trackit software is available on the included CD/USB disk or on the Lifelines FTP site. A readme file describes
installation. The Trackit Software version 2.8.1.7 (or later) supports the Trackit T4. Check with your distributor or
Lifelines if a newer version of software is available.
The Trackit software is designed to work with both the Trackit T4 Amplifier and with the optional Photic Stimulator.
The software is supported on Microsoft Windows XP, Windows Vista and Windows 7, Windows 8 and Windows 10.
The USB drivers will be found on the CD. After connecting the Amplifier to the PC for the first time, at the Windows
prompt, browse to the folder CD Drive:\USB Drivers. From there Windows will find the correct drivers for the
version of Windows being used.
The software has the following functions:
y
Define signal types: create labels to attach to inputs
y
Attach the desired signal type (label) to the recording input
y
Create a recording montage and download it to the amplifier
y
Perform a calibration of the inputs
y
Perform an impedance check on the inputs
y
View ongoing signals and adjust display parameters such as chart speed and display sensitivity
y
Start and stop a recording session
y
Open and review EEG recordings (EDF and BDF format)
NOTE: See separate Trackit Plus software manual for setup and recording details.
Trackit Software – overview