L I F E L I N E A M P L I F I C A T I O N S Y S T E M S
❚
4 1 M E A N S D R I V E
❚
S U I T E A
❚
P L A T T E V I L L E , W
4
R E C E I V E R
Receiver
Receiver front
Receiver back
1. POWER SWITCH
Turn the receiver ON and OFF.
2. POWER LED
Indicates if the receiver is ON or OFF.
3. RECEIVING SENSORS
Internal receiving infrared sensors
4. CHANNEL 1 VOLUME
Controls the volume for channel 1.
5. CHANNEL 1 INDICATOR
Glows red when receiving signal from
transmitter to channel 1.
6. CHANNEL 2 VOLUME
Controls the volume for channel 2.
7. CHANNEL 2 INDICATOR
Glows red when receiving signal from channel 2.
8. SWITCHED EXTERNAL SENSOR INPUT
(RCA CONNECTOR)
Plugging an external sensor in here turns the front
panel sensor (C) off. This will hardly ever get used.
9. 2-EXTERNAL INPUTS (RCA CONNECTORS)
Each sensor will extend the range by 1600 square
feet. One external sensor comes with the Freedom 2
Infrared Amplification System. This might not be
needed in some instances.
10. INPUT SELECTOR
Always have this in the LINE position.
11. OUTPUT JACK
This connects the receiver to the Lifeline
amplifier. Cable has been provided.
12. POWER INPUT
Plug the provided AC adapter (BC-28I) into a
standard electrical outlet.
1
2
3
4 5
6 7
8
9
10
11
12
