9
3. Rear Handlebar Installation
Remove two M8x45 Bolts (19), two Ø8xØ20 Big Curve Washers (28), and two M8 Cap Nuts
(12) from the Rear Handlebar (55). Remove bolts and cap nuts with the 5mm Allen
Wrench and Multi Hex Tool with Phillips Screwdriver provided.
Attach the Rear Handlebar (55) onto the Back and Seat Support Bracket (59) with two
M8x45 Bolts (19), two Ø8xØ20 Big Curve Washers (28), and two M8 Cap Nuts (12) that
were removed. Tighten bolts and cap nuts with the 5mm Allen Wrench and Multi Hex Tool
with Phillips Screwdriver provided.
Connect the Hand Pulse Sensor Wires (22D) from the Rear Handlebar (55) to the Extension
Hand Pulse Sensor Wires C (22C) from the Rear Main Frame (39).
12
22D
19
28
55
22C
59
Tool:
Allen Wrench 5mm
Multi Hex Tool with Phillips Screwdriver
S8, S13, S14, S15