13
STEP 11
It is recommended to have a second person assist with this step. One person should hold
the Handlebar Post (29) in place while the other person to connect the wires.
Connect the Sensor Wire (53) from the Main Frame (10) to the Extension Sensor Wire (50)
from the Handlebar Post (29).
Put the cable end of resistance cable of Tension Control Knob (32) into the cable lock of
Tension Cable (54), see Figure A.
Pull the resistance cable of Tension Control Knob (32) up and force it into the slot of metal
bracket of Tension Cable (54), see Figure B.
Insert the metal fitting on the resistance cable of Tension Control Knob (32) into the hole at
the end of the slot in the metal bracket of Tension Cable (54), see Figure C.
Connect the resistance cable of Tension Control Knob (32) to Tension Cable (54) complete,
see Figure D.
A
B
C
D
50
53
53
50
10
54
54
54
54
54
32
32
32
32
29
26
32
