background image

 

19

TROUBLESHOOTING 

 

PROBLEM: 

The rower wobbles when in use. 

SOLUTION:

 Turn the adjustable level on the front stabilizer as needed to level the rower. 

 
PROBLEM: 

There is no display on the computer console. 

SOLUTION: 

Remove the computer console and verify the wires that come from the 

computer console are properly connected to the wires that come from the main frame. 

SOLUTION:

 Check that the batteries are correctly positioned and battery springs are in 

proper contact with batteries. 

SOLUTION:

 The batteries in the computer console may be dead.  Replace the dead 

batteries with new batteries.  Do NOT mix old and new batteries.

 

 

 

 

PROBLEM: 

The rower makes a noise when in use. 

SOLUTION: 

The bolts may be loose on the equipment.  Please inspect all of the nuts, 

bolts, screws and tighten any loose Hardware. 

 

 

PROBLEM: 

The computer console is on but it is not tracking my workout.  The strokes are 

not counting up. 

SOLUTION: 

Press the START button before starting your workout.  The computer console 

does NOT auto start when user starts pulling on the strap.  This is to allow you to choose 
setting up a workout goal option before starting the workout. 

SOLUTION: 

Make sure the 3 computer console wires on the back of the computer console 

are connected. 

 

If the above troubleshooting section does not fix the problem, discontinue use the 
rower. 
 

PLEASE CONTACT YOUR LOCAL DEALER FOR 

SUPPORT.  

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Содержание 30640























Отзывы: