LifeGear 23700 Скачать руководство пользователя страница 14

Страница: 14 / 17

TROUBLE SHOOTING GUIDE

1. Verify that all the bolts and nuts are locked properly and the turning parts should be

turned freely without damaged parts.

2. Clean the equipment with soap and slightly damp cloth only. Please do not use any

solvent to clean the equipment.

Problem Potential

Cause

Corrections

Base is unstable.

1. Floor is not flat or there is

small object under the front

or rear stabilizer.

2. The adjustable levelers on

the rear stabilizer have not

been leveled when

adjusting.

1. Remove the object.

2. Adjust the adjustable levelers.

Handlebar or seat

cushion is shaking.

The T-Knob or seat height

adjusting knob is loose.

Tighten the T-Knob or seat height

adjusting knob.

Loud noise from

the moving parts.

The interval of the parts is

improper tighten.

Open the covers to adjust.

No resistance when

riding the upright

bike.

1. Motor is not working.

2. Belt

slips.

1. Open the covers to check.

2. Open the covers to adjust.

Содержание 23700


















Результаты поиска

Содержание 23700

Отзывы:

Бренды по названию

Популярные бренды

LifeGear 23700, Руководство пользователя

Результаты поиска

Содержание 23700

Отзывы:

Бренды по названию

Популярные бренды