background image

1. Getting Started

Safety Instructions

Read all instructions before use.

CAUTION: Any changes or modifications to this equipment could void the product warranty.

WARNING: Health-related injuries may result from incorrect or excessive use of exercise equipment. Life
Fitness STRONGLY recommends seeing a physician for a complete medical exam before undertaking an
exercise program, particularly if the user has a family history of high blood pressure or heart disease, is over the
age of 45, smokes, has high cholesterol, is obese, or has not exercised regularly in the past year. If, at any time
while exercising, the user experiences faintness, dizziness, pain, or shortness of breath, he or she must stop
immediately.
WARNING: To reduce the risk of burns, fire, electric shock, or injury, it is imperative to connect each product to
a properly grounded electrical outlet.
WARNING: Heart rate monitoring systems may be inaccurate. Over exercising may result in serious injury or
death. If you feel faint, stop exercising immediately.
WARNING: Do not use for stretching and do not attach straps or other devices.

WARNING: Keep batteries out of reach of children.

Some chest straps may contain a removable battery.

• Swallowing may lead to serious injury in as little as 2 hours or death, due to chemical burns and potential

perforation of the esophagus.

• If you suspect your child has swallowed a battery, immediately call your local poison control for fast, expert

advice.

• Examine devices and make sure the battery compartment is correctly secured, e.g. that the screw or other

mechanical fastener is tightened. Do not use if compartment is not secure.

• Dispose of used button batteries immediately and safely. Flat batteries can still be dangerous.
• Tell others about the risk associated with button batteries and how to keep their children safe.
WARNING: Allow a distance of 16 in. (41 cm) between the widest part of the bike and other objects on either
side. Provide at least 3 ft. (0.9 m) between the front or rear of the bike to any other objects and 2 ft. (0.6 m) in
the direction the equipment is accessed from.
WARNING: This product can expose you to chemicals including Acrylonitrile, which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to 

http://

www.P65Warnings.ca.gov

DANGER: To reduce the risk of electrical shock or injury from moving parts, always unplug product before
cleaning or attempting any maintenance activity.

• Never operate the product if it has a damaged power cord or electrical plug, or if it has been dropped, damaged,

or even partially immersed in water. Contact Customer Support Services.

• Position the product so that the power cord plug to the wall is accessible to the user. Make sure that the power cord

is not knotted or twisted and that it is not trapped under any equipment or other objects.

• If the electrical supply cord is damaged, it must be replaced by the manufacturer, an authorized service agent, or a

similarly qualified person to avoid a hazard.

• Always follow the console instructions for proper operation.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory, or mental

capabilities, or lack of experience or knowledge unless they have supervision or been given instruction concerning
the use of the appliance by a person responsible for their safety.

• Do not use this product outdoors, near swimming pools or in areas of high humidity.
• Never operate the product with the air openings blocked. Keep air openings free of lint, hair, or any other

obstructing material.

• Never insert objects into any opening in these products. If an object should drop inside, turn off the power, unplug

the power cord from the outlet, and carefully retrieve it. If the item cannot be reached, contact Customer Support
Services.

• Never place liquids of any type directly on the unit, except in an accessory tray or holder. Containers with lids are

recommended.

• Do not use these products in bare feet. Always wear shoes. Wear shoes with rubber or high-traction soles. Do not

use shoes with heels, leather soles, cleats or spikes. Make sure no stones are embedded in the soles.

• Keep all loose clothing, shoelaces, and towels away from moving parts.

Page 4 of 39

Содержание INRD-SLXX











































Отзывы: