LIFEFIT 4891223123265, Руководство пользователя

Страница: 25 / 46

4. Installation and parts list
Carefully take out the treadmill from the
shipping carton. Ensure that none of the
parts is not missing (picture no. 1).
Use 5mm inner hexagon wrench and screw
M8*50 and screw M8*20 to lock washer and
nut and fix columnt on the base.
Hold left and right columns, use
5 mm inner hexagon wrench
and screw M8*20 to lock the
console on the columns.
Use screwdriver and screw M5*16 to fix
the base corner covers on the columns.
Take out the console, connect the signal lines
one by one (A), put the extra exposed lines into
the case and then put the console on the console slot (please be careful and do not
stuck or cut the lines), adjust the position and use screw M8*20 to lock it tightly.
Note: The machine can only be started with the safety key located in the correct
position. Keep the safety key away from children.
Note: Please confirm that all screws are locked uniformly according to the
requirements after installation and check that no part is left out before pugging
electricity.
M8*20
M8*50
M8*20
M5*16