Assemby & Use
How to Replace Your Silicone Sleeve:
• Be Safe. Please ensure your glass bottle does not have cracks and is
not shattered when removing from the sleeve. Safety is a priority, so
if you cannot safely remove the sleeve, please throw the bottle and
sleeve away.
• Remove the sleeve from the used bottle. Wash by hand with warm
soapy water and lather up the glass bottle to remove the silicone sleeve.
• Prepare the new bottle. Use warm soapy water to clean the new glass
bottle inside and out. Lather up the glass bottle to easily slip the
silicone sleeve on.
• Slide the sleeve onto the new bottle. Ensure that both the bottle
and sleeve are lathered with warm soapy water and slide the new
sleeve onto the bottle.
• Rinse and Dry. Rinse off any residual soap from the bottle and let
the bottle dully dry. Enjoy your new bottle.
Warnings
• DO NOT leave children unattended with this product.
• The silicone sleeve DOES NOT guarantee against breakage. If cracks or breaks appear in the glass, dispose of
bottle immediately.
• Extreme temperature differences between glass and contents may cause cracking or breaking of glass.
• Always check glass for cracks or breakage before each use.
• DO NOT freeze or boil glass bottle.
• DO NOT use product in microwave, on stove top, or in any type of oven.
• The straw lid or the flip cap lid ARE NOT FOR USE WITH HOT LIQUIDS. The straw lid and flip cap lid are for cold
liquids only. Hot liquids may burn or scald user. See following lid images to help determine which lid you have:
PRESS-N-GO CAP
ACTIVE FLIP CAP
*NOT FOR HOT LIQUIDS
*NOT FOR HOT LIQUIDS
PIVOT STRAW CAP
CLASSIC CAP
