25
Assembling Your Elliptical
G. Remove the Bolt from the
lower end of the right mid
arm and right pedal arm. Re-
move the
Right Mid Arm
from
the
Main Base(1)
. Reinstall the
removed bolt into the
Right
Pedal Arm
being sure the
spacer is still in place.
H. Repeat step G for the
Left Mid
Arm
and
Pedal Arm
.
Note:
The bolts are
being reinstalled so
they are not lost for
future assembly steps.
Make sure the sleeve
in the center of the
bearing is still in place
prior to reinstalling
the bolt.
I. Cut the corners
of the bottom
box and remove
all packaging.
J. Place
Rail Base(2)
in position with
mounting holes
in
Main Base(1)
.
Step 2: Hardware Loss Prevention Sheet
A. The
Main Base (1)
has the
Hardware Loss Prevention Sheet
draped around
the
Console Mast Support
. The purpose of this paper is to act as a shield
to prevent bolts, washers and screws from falling into the
Main Base
during assembly. Do not remove until assembly is complete. The paper
tears off easily when done and can be thrown away.
I
J
2
1
Hardware Loss
Prevention Sheet
Do Not Remove Until
Assembly is Complete
G
H
Содержание E5i
Страница 1: ...E5i Commercial Elliptical Trainer Owner s Manual ...
Страница 9: ...13 About Your Elliptical ...