- 7 -
Before Requesting Service
Problem Recommended
Action
Nothing appears on the display,
even when knocking the scale or
pressing the switches.
Reinstall the batteries with negative and positive terminals
matching those indicated on the battery compartment.
Replace all batteries with new ones.
or
is displayed.
Is anything touching the scale?
Is there anything under the scale?
Remove and reinstall the batteries. Use new ones.
is displayed and the
scale is turned off.
There is a large difference
between actual weight and
measured weight
Place the scale on a solid, firm, and level surface.
Did you allow the scale to zero before applying weight?
Is there anything under the scale?
ActiLink/computer software is not
receiving new measurements
Is your computer on and your ActiLink plugged in?
Move the scale closer to the ActiLink with a clear
line-of-sight and take a measurement.
Replace all batteries with new ones.
Note
If the actions described above do not solve the problem, please contact LifeSource. Do not attempt
to open or repair this product, as any attempt to do so will make your warranty invalid.
Maintaining the Scale
Clean the scale with a soft dry cloth.
Never use water, detergent, alcohol, benzene, thinner or other harsh chemicals to clean the scale.
Remove the batteries if the scale is not going to be used for a long time.
Specifications
Measuring
method
Electric
resistance
Digital
display
Liquid
crystal
display
Maximum capacity (MAX)
330 lbs / 150 kg
Minimum display (d)
0.2 lbs / 0.1 kg
Power source
Four type AA batteries (1.5 V)
Dimensions
13.8 (D) x 13.8 (W) x 1.5 (H) in / 350 (D) x 350 (W) x 39 (H) mm
Weight
Approximately 4.8 lbs (2.2 kg), including the batteries
Accessories
Instruction manual, batteries (AA x 4)
Note
Specifications are subject to change without prior notice or any obligation on the part of the
manufacturer.
