Life Smart YAA02E-11, Руководство по безопасности и эксплуатации

Страница: 8 / 10

--SAVE THESE INSTRUCTIONS--
8
2. Use the
+ and -
buttons to set the heater start time between 1 and 10 hours. This function will activate
once the timer icon stops blinking.
3. The heater will automatically turn on when time expires.
NOTE: If the desired temperature was set prior to setting the timer function, the heater
will cycle on and off as per the selected desired temperature setting once the heater
begins to operate.
NOTE: When using the Auto-On function the heater will turn on after the set time has
elapsed. If the Auto-Off function has not been set , a default timer of 10 hours will be
applied to the function.
TIMER FUNCTION EXAMPLES
Auto on Example :
Set Auto off for 3 hours
the heater will start running after 2 hours has elapsed
；
.
Set Auto on for 2 hours
The heater will then operate for 3 additional hour and then immediately turn off.
Auto off Example :
Set Auto off for 7 hours
：
The heater will shut off after 7hours has elapsed.
FAHRENHEIT/CELSIUS FUNCTION
NOTE: This heater offers the option to read the temperature setting in either
Fahrenheit or Celsius.
1. F/C feature functions from only the power or set temperature screens.
2. Press F/C button to toggle between Fahrenheit and Celsius.
5. Care and Cleaning
CAUTION: Allow the product to completely cool before handling or cleaning it.
Ensure the product is in the “O” OFF position and the Power Cord is unplugged from the
electrical outlet before cleaning the product.
•
Always ensure the product’s housing is intact and completely assembled before each
use.
•
Do not touch hot surfaces. Always use the handle of the product. Use protective
mitts or gloves to avoid serious burns or other personal injury.
•
Clean the exterior surface of the product by wiping it with a soft, damp cloth.
CAUTION: Do not allow water or other liquids to run into the interior of the product, as
this could create a fire and/or electrical hazard.
•
Do not use any abrasive cleaners or solvents, as product damage will occur.
•
Store the product in a clean, dry place when it is not in use.