background image

5

SAFETY INFORMATION 

Child Lock Safety Feature

Press and hold the child lock button located on the control panel for 5 seconds or 

remote control for 3 seconds . Locking is confirmed when a buzzer rings and the 

control panel displays “CL” . When locked, the control panel and remote control (if 

provided) will not function .
To  unlock  the  control  panel  or  remote  (if  provided),  repeat  this  procedure . 

Unlocking is confirmed when a buzzer rings and the lock indication disappears .
Tip-Over Safety Feature
This heater is equipped with a tip-over safety feature . Once the heater is tipped over, an internal switch 

will automatically shut the heater off . Once the heater is restored to an upright position, the heater will 

reset . To continue operation, turn on the heater using the control panel or supplied remote control (if 

provided) on the heater .
Overheat Safety Feature
This heater is equipped with an overheat safety feature . When the internal components of the heater reach 

a certain temperature that could cause overheating or possible fire, the heater will automatically shut off .

WARNING: This heater has a voltage rating of 

120 volts . The cord has a three-blade, grounding-

type  plug .  An  adapter  is  available  for  connecting 

three-blade  grounding-type  plugs  to  two-slot 

receptacles .  The  grounding  lug  extending  from 

the  adapter  must  be  connected  to  a  permanent 

ground  such  as  a  properly  grounded  outlet  box . 

The  adapter  should  not  be  used  if  a  three-slot 

grounded receptacle is available .
DO NOT DEFEAT THE SAFETY PURPOSE OF THE 

GROUNDED PLUG . 

Grounding Pin

Grounding Means

Grounding Pin

Metal Screw

Cover of Grounded 

Outlet Box

WARNING: It is normal for the power cord to feel warm to the touch . However, a loose fit between the 

outlet and the plug may cause overheating of the plug . If this occurs, try inserting the plug into a different 

outlet . Contact a qualified electrician to inspect the original outlet for damage .
Specifications 

Voltage Rating 

120 V (60 Hz)

Power Consumption

1,000 W/1,500 W

Unit Size

7 .5 in . (W) x 9 .8 in . (D) x 18 in . (H)

Unit Weight

8 .82 lbs .

Содержание R-HT1156
















Отзывы: