remind you by voice prompt "Battery low" every 20 seconds, and the red indicator light will start to flash.
- For using the IE350 with iPhone, an additional battery meter ( ) will be activated and the
remaining battery capacity will display on your phone.
7. Pair to your Bluetooth® phone
Before you use your headset for the first time, you must pair the unit with a Bluetooth® enabled
mobile phone. Pairing is a one-time process and required only for the first connection with the
Mobile phone. The IE350 can be connected with two mobile phones simultaneously.
1)Keep the IE350 within 1 meter range of a Bluetooth®-ready Mobile phone.
2)Press and hold the Power/Play button for about 5 seconds, the indicator light will flash red and
blue intermittently, the device is now in pairing mode.
3)Find the Bluetooth® setting of your Mobile phone and start the search for Bluetooth® devices. (For further details, please read the
operating instructions of your Mobile phone).
4)From the list of devices found, select the "IE350 ".
5)If required, enter the PIN code "0000" and confirm the entry. Once the pairing process is successful, the SH802 will connect to the
Mobile phone automatically then switch to standby mode, seen when the indicator flashes blue every 5 seconds.
Note: 1)If pairing is not completed within 2 minutes, the headset will turn off. If this happens, please repeat the pairing steps.
2)The IE350 supports Multi-connection that allows for the simultaneous use of the IE350 with two mobile phones. After paring
successfully with 2 mobile phones, switch off the headset and switch on again, the headset will connect to both 2 mobile phones
automatically. Otherwise, you can connect the headset on the cellphone manually.
8.Turning headset on /off
Turn on your headset: Hold the Power/Play for 3 seocnds to turn on your headset. If your headset has completed the pairing
process successfully, when the headset is turned on, it will connect to the phone you last connected to automatically. Please ensure
your phone's Bluetooth® function is active.
Turn off the headset: Hold the power button for 3 seconds to turn off the headset. The Red indicator will flash red.
Note:
To conserve power, if the headset is not connected to a device for approximately 10 minutes, the headset will turn off automatically.
9.Selecting the Voice prompt language
The IE350 supports voice prompt for the headset’s status announcement in 5 different languages (English, Chinese, Spanish,
French, German). At the standby state with connection, hold the Answer button to shift the languages one by one, then click the
Power/Play once to select the languages.
10. Wearing the headset
For the best sound performance and a secure, comfortable fit, be sure
the ear buds rest gently in your ear and drape around the back of our
neck. Use the provided fit kit to find the ear tip that works best for you.
11.Using for music play
Play/Pause : Press Power/Play button to get the music to play or pause.
Next/Previous song: Press and hold the Next button to skip to the next song or chapter, press and
hold Previous button to go back previous song or chapter.
Increase/Decrease volume: Press Volume Up button to increase volume, press Volume Down button
to decrease volume.
Note: The IE350 supports A2DP profile that allows stereo music streaming from a Bluetooth phone. The music will pause
automatically while a call is dialed out/incoming, and resume when the call conversation has ended.
12. Using for phone call
Re-Dialing Last Number: At standby status, double press the Answer button, the last number you dialed will be re-dialed.
Note: Re-dialing the last number is available only for the first device if two Mobile phones are connected. The connection sequence
can be determined by reconnecting manually.
Answering a call: Press Answer once to answer the incoming call.
Reject an incoming call: Press and hold Answer for 2 seconds to reject the incoming call.
Transferring a call: Press and hold Volume Up for 2 seconds to transfer the call between the phone and headset.
Ending a call: Press the Answer once to end a call.
