Charging:
This headset uses a non detachable built-in rechargeable battery.
1. Before charging, make sure the headset has switched off.
2. Plug USB cable into the charging port of headset; plug other side of USB cable into the USB charger or other charging device.
Charging will start and the red light remains bright on the headset.
3. The headset takes approximately 5 hours for fully charged, blue light remains bright or red light switch off after charging completed.
Switch on:
1. Gently push the “On/Off Button” to switch the headset. Keep press the “MF Button” for around 2 seconds entered to pairing
mode, red light and blue lights blinks alternately, Or; When the headset was switched on, keep press the “MF Button” for around 5
seconds, then, restart the headset, entered to pairing mode, red and blue lights blinks alternately.
Switch off:
Gently push the “On/Off Button” to switch off the headset, it will issue the beep sound, blue light and red light switch off.
Pairing your headset with your mobile phone:
1. Keep distance of the headset and mobile phone (or other device need to be connected) within 1 meter when pairing.
2. Switch on the headset, make sure entered to pairing mode, red and blue lights blinks alternately.
3. Switch on Bluetooth search function of your mobile phone or other device need to be connected, the mobile phone will display has
found the “LnS- BE501”;
4. Select “LnS- BE501”, your headset will be automatically connected to your mobile phone (Parts of mobile needs pairing
password”0000”), the blue light blinks.
IMPORTANT:
The pairing time is limited, generally takes 300 seconds. If blue light disappeared, the Bluetooth pairing mode has stopped.
If pairing is unsuccessful, please retry step 1 to 4 again.
Connect the headset with two mobile phones:
1. Keep distance of the headset and mobile phone (or other device need to be connected) within 1 meter when pairing. The closer the
better.
2. Switch on the headset and ensure that the headset enters into pairing mode, red and blue lights blinks alternately, turn on Bluetooth
function of phone 1 and pair it with the Bluetooth headset
3. Turn off the Bluetooth of mobile phone 1 and switch off the headset.
4. Switch on the headset and ensure that it enters to pairing mode again. Then turn on phone 2 and pair it with the Bluetooth headset
“LnS- BE501”;
5. Turn on the Bluetooth of mobile phone 1, connecting the paired headset “LnS- BE501”. The headset connects with two mobiles at the
same time.
Disconnect the headset from the mobile phone:
Switch off the headset; Or
Switch off Bluetooth function of the mobile phone; Or
Move the headset away from the mobile phone for 20m (66ft) or further position.
Reconnect the paired headset with the mobile phone:
1. Keep distance between the headset and mobile phone (or other device needed to be connected) within 1 meter when pairing.
2. Switch on the headset, the headset will be entered to reconnection mode, red light blinks.
3.Switch on Bluetooth search function in the mobile phone or other device needed to be connected, your mobile phone will
automatically connect with your headset. The blue light will blink after reconnection. (Some mobile phone's Bluetooth turns on the
headset automatically to establish a connection with the mobile phone)
Answer incoming call:
1. When Bluetooth headset has connected to your mobile phone, the headset will issue a call tone or a ring tone when there is an
incoming call.
2. Press the “MF Button” once to answer incoming calls or use the answer button of your mobile phone.
Drop call:
Press the “MF Button” once or use your mobile phone button to drop the call.
Reject call:
1.During an incoming call, the headset will issue a call tone or a ringtone. 2. Keep pressing the “MF Button” for around 2 seconds, then
release to reject the call, or directly use your mobile phone’s hang up button.
