13
OPERATING THE COMPUTER
SPECIFICATIONS:
TIME --------------------------------------------------- 0:00-99:59 MIN: SEC
SPD (SPEED) --------------------------------------- 0.0-99.9 KM/H
DIST (DISTANCE) --------------------------------- 0.0-999.9 KM
CAL (CALORIES) ---------------------------------- 0.0-999.9 KCAL
ODO (ODOMETER) ------------------------------- 0-9999 KM
PULSE ------------------------------------------------ 40-240 BEATS/MIN
USING YOUR COMPUTER
The computer can be activated by pressing the buttons or by pedaling. If you leave the
equipment for 4 minutes, the power will turn off automatically.
BUTTON FUNCTIONS:
MODE:
Press the MODE button to select each function of the computer.
Press and hold the MODE button for 3 seconds to reset all data values to zero except the
ODO (ODOMETER) data values.
UP:
Press the UP button to increase the data values of TIME, DISTANCE, CALORIES, or
PULSE for target pre-setting.
DOWN:
Press the DOWN button to decrease the data values of TIME, DISTANCE,
CALORIES, or PULSE for target pre-setting.
RESET:
Press the RESET button to clear data values of TIME, DISTANCE, or CALORIES to
zero.
Press the RESET button to clear data values of TIME, DISTANCE, CALORIES, or PULSE to
zero for target pre-setting.
Press and hold the RESET button for 3 seconds to reset all data values to zero except the
ODO (ODOMETER) data values.
COMPUTER FUNCTIONS:
SCAN:
Press the MODE button until the screen displays SCAN, the computer will
automatically scan each function in sequence with change every 6 seconds.
TIME:
Displays your elapsed workout time in minutes and seconds. You may also pre-set
target time in STOP mode before training. To set TIME press the MODE button until you
see the TIME on the screen. Press the UP or DOWN button, TIME begins blinking. Press
the UP or DOWN button to change the time, each time you press the UP or DOWN button
TIME should change by 1 minute. Press the RESET button to clear the target time to zero.
The pre-set target time range is from 0:00 to 99:00 minutes. Once you pre-set target time
and then start to exercise, time starts counting down from pre-set target time to 0:00 per 1
second backward. When the pre-set target time counts down to 0:00, time will start to
count up immediately and the computer will begin beeping to remind you.
SPD (SPEED):
Display the current training speed.
