manualshive.com logo in svg

Life Fitness T3, Руководство по обслуживанию, Страница: 24 / 67

Поделиться
Скачать
Life Fitness T3 Скачать руководство пользователя страница 24

Section 2

11

Life Fitness T-Series Consumer Treadmills

USER MENU STATES – User Statistics

USER STATISTICS (T3i/T5i/T7i ONLY)

This state displays the currently accumulated statistics for up to 4 different users. Select a user using My Workout
key and then press the Enter key. Use the Up/Down arrow keys to move through the statistics. Below is a list of
what will be displayed. If any data exceeds listed dashes will be displayed “----“. These statistics can be cleared to
zero by pressing the Speed Up arrow. The message "Press Speed Down Arrow Key to Clear Unit Stats" will be
displayed. At this time pressing the Speed Down arrow key will clear the statics. The message  "Unit Stats Clear"
will appear in the display. If you press any other key after pressing the Speed Up arrow, you'll cancel the clearing of
the stats and you must re-activate the clearing process by pressing the Speed Up arrow key again.

User Statistics

Display Item

 

Data Item

Miles

 

Total accumulated distance up to 9999.99 miles.

Calories

 

Total accumulated workout calories.

Time

 

Total accumulated workout time - displayed in hours:minutes format (up
to 9999:59 = 9999 hours and 59 minutes)

 UNIT SETTINGS

There are currently 3 settings that can be adjusted and saved. Any adjustments are automatically saved. You can
revert a setting back to its default value by pressing the Cool Down button.

In the table below, cycle throught the settings using the Up/Down arrow keys. Use the Time Arrows to adjust
the settings.

Unit Settings T3i/T5i/T7i

Display Item

Setting Notes

Pause Time = xx

This item sets the maximum time that pause will last. It ranges from 1 to 99
minutes.

Sleep Time = xx

This item sets the time it takes before 'Sleep Mode' is entered. Its ranges if
from 1 to 99 minutes or 'OFF'.

Units = English /
Metric

This item sets what units the weight, speed, and distance will be displayed
in. It can be set for 'English Units' or 'Metric Units.'

In the table below, cycle throught the settings using the Time arrow keys. Use the Incline arrow keys to
adjust the settings.

Unit Settings -T3/T5

Display Item

Setting Notes

PAUS xx

This item sets the maximum time that pause will last. It ranges from 1 to 99
minutes.

SLEP xx

This item sets the time it takes before 'Sleep Mode' is entered. Its ranges if
from 1 to 99 minutes or 'OFF'.

UnS x En

This item sets what units the weight, speed, and distance will be displayed in.
It can be set for 'English Units' or 'Metric Units.' (Uns = 'Units') and (0 = En =
'English') and (1 = m = 'Metric').

FL xxx

Sets whether or not the flying circles are active during Attract mode. Either
the words ON or OFF will appear in the Display.

SOFTWARE VERSION NUMBERS (T3i/T5i/T7i only)

This state shows the current Software Version for the Console, Motor Controller, and Software Part Number. Use
the up/down arrow keys. Use these keys to toggle between the console software version and the motor controller
version. The Console software version number is displayed as “CONSOLE VER=PXX.X”. The motor controller
software version number is displayed “MOTOR VER=PXX.X”

Sectio

n II

Содержание T3




































































Отзывы:

Нет отзывов