1.
LOOSELY assemble the TOP CROSS MEMBER (1) onto the two UPRIGHT
FRAMES (2) using four M10 X 70mm SCREWS (3), eight 3/8" SAE WASH-
ERS (4), and four M10 NYLOCK NUTS (5) as shown.
2.
Assemble the BOTTOM CROSS MEMBER (6) onto the two UPRIGHT
FRAMES (2) using four M10 X 140 SCREWS (7), eight 3/8" SAE WASH-
ERS (4) and four M10 NYLOCK NUTS (5) as shown.
3.
Tighten all SCREWS and NUTS securely.
Содержание SBBR
Страница 1: ...Signature Barbell Rack Owners Manual ...
Страница 3: ...FOUND ON THE FRAME FOUND AT MOVING PARTS ...
