User USB Port (PCB-009)
Theory of Operation:
A Type A USB port is provided to the user along the bottom edge of the console, behind the door with the USB
symbol, next to the headphone jack. The USB port is inside the angled, over-molded assembly and is screwed into the
rear bezel. The USB port is intended for software updates, saving console logs, or charging the user’s portable device.
For charging, the user must also bring the device’s charge cord. The User USB port is over-current and short circuit
protected above 2.1 Amps. This part is easily serviced.
Functions/Connectors:
Connector to Main Board Contains USB signals (+5 VDC and D+ / D-) from user accessible USB port at console front
to main board.
Troubleshooting tips:
• Plug any USB stick into the port and it should blink as it the console mounts the USB stick.
• If the USB stick has the correctly named software file at the USB stick’s root, it will automatically start updating the
console’s software.
• Can also extract logs (copied to a USB stick without the software update file) via Diagnostics.
• Plug a cord into the user USB port and then plug it into the corresponding portable device to charge it.
Page 19 of 153
Содержание Integrity SL
Страница 1: ...Integrity SL Service Manual REV July 15 2021...
Страница 2: ......
Страница 68: ...6 Troubleshooting Knowledge Base See Knowledge Base for more detailed information Page 66 of 153...
Страница 156: ......