Life Fitness Models 9500RHR / 9100R Recumbent Exercise Bike
Fitness Entertainment Kit Installation (Continued)
Step 12
Apply a CABLE CLAMP to the user front of the MONOCOLUMN
approximately 6” up from the top of the COLLAR. Apply a second CABLE
CLAMP to the user front of the MONOCOLUMN approximately 1” down from
the DISPLAY CONSOLE BRACKET. Continue routing the FITNESS
ENTERTAINMENT CABLE ASSEMBLY upwards flat against the COLLAR
and MONOCOLUMN and insert the FITNESS ENTERTAINMENT CABLE
ASSEMBLY into the CABLE CLAMPS.
Step 13 (Cardio Theater Wireless System Only)
NOTE: WITH A SUPPLIED ALCOHOL WIPE, CLEAN THE SHROUD AT
EACH HOOK AND LOOP FASTENING STRIP LOCATION BEFORE
MOUNTING THE HOOK AND LOOP FASTENING STRIPS.
Remove the four screws and mounting block from the back of the FITNESS
ENTERTAINMENT RECEIVER. Remove the backing on one side the hook
and loop fastening strips provided and apply lengthwise to the back of the
FITNESS ENTERTAINMENT RECEIVER. Remove the backing of the
remaining side of the hook and loop fastening strips and apply the FITNESS
ENTERTAINMENT RECEIVER to the underside of the DISPLAY CONSOLE
as shown. Press firmly to ensure proper adhesion.
Step 14 (Cardio Theater Wireless System Only)
Plug the FITNESS ENTERTAINMENT CABLE ASSEMBLY and the FITNESS ENTERTAINMENT TOUCHPAD CABLE ASSEMBLY
into the appropriate jacks on the FITNESS ENTERTAINMENT RECEIVER.
Step 16
Using two supplied wire ties, mount the FITNESS ENTERTAINMENT TOUCH
PAD to the bike. Controller location is at the discretion of the customer. Refer to
the CARDIO THEATER or BROADCAST VISION MANUAL for suggested
locations.
Step 15
Plug the remaining end of the FITNESS ENTERTAINMENT TOUCHPAD
CABLE ASSEMBLY into the FITNESS ENTERTAINMENT TOUCHPAD
(
Cardio Theater Wireless System). Plug the end of the
FITNESS
ENTERTAINMENT CABLE ASSEMBLY into the FITNESS ENTERTAINMENT
TOUCHPAD.
MO51-00K46-B028
Display
Console
Touchpad
Handlebar
Cable Clamps
Cable
Assembly
Collar
Display Console
Bracket
Monocolumn
Receiver
Display Console