Attach Rear Console Shroud Assembly
1.
Insert grommets into the two holes on the back of the console support weldment.
2.
Push the clips on top of the rear cover into the corresponding slots on the console support weldment.
3.
Use two screws to go through the two holes on the back of the rear cover to the corresponding two grommets on
the console support weldment.
Item
Description
Qty
1
Rear Cover
1
2
M4.2 X 19 Phillips Pan Head Screw
2
3
Grommet
2
1.5 Nm (13.3 in. lbs.)
Page 20 of 33
