Life Fitness Axiom OP-MP, Руководство по сборке

Страница: 27 / 38

4. Press gas shock onto the ball studs.
NOTE: Make sure gas shock is oriented as shown.
Item Description Qty.
1 Gas Shock 1
2 Ball Stud 2
Cable Routing
1. Route cable out through hole at the bottom of tower side tube. Route cable through the lower pulley assembly.
2. Slide the carriage bolt to the end of the slot in the lower pulley assembly using a 17mm wrench.
Item Description Qty.
1 Carriage Bolt, M10 x 1.5, 50mm 1
Tighten hardware to 20-25 ft-lb (27.1-33.9 Nm).
3.
Install screws and washers securing the lower pulley assembly to the tower frame using an 8mm Allen wrench.
Item Description Qty.
1 Lower Pulley Assembly 1
2 Cable 1
3 Tower Frame 1
4 Washer, Flat 3/8" 4
5 Screw, M10 x 1.5, 25mm 4
Tighten hardware to 20-25 ft-lb (27.1-33.9 Nm).
Page 25 of 35