Life Fitness 95L, Руководство по обслуживанию

Страница: 118 / 134

Models 95L, 95LWEZ, and 95LE Summit Trainers
How To…
116
HOW TO… REPLACE THE CLUTCH SPROCKETS
Tools required: Phillips screwdriver, 13mm socket, ratchet, metric Allen set, snap ring pliers
Estimated repair time: 30 minutes
1. Remove the main
shrouds (see “How
To…” on page 86).
2. To replace the clutch
sprocket on the user’s
right side of the
Summit Trainer, walk
the Flexonic belt off
the clutch shaft pulley.
3. If replacing the user’s
right side clutch
sprocket, loosen the
set screws on the
pulley.
4. Slide the pulley off the
clutch shaft.
5. Scribe the position of the tension bracket.
6. Loosen the tension bracket mounting bolts.
7. Loosen the tensioning bolt until the tension
bracket is as loose as possible.
8. Slide the upper belt off the clutch sprockets.
9. Remove the snap ring that holds the user’s
left clutch sprocket in place on the clutch
shaft. Note the orientation of the thrust
washer and hardened washer when
removing.
10. Install new the clutch sprocket/sprockets.
11. Reinstall the snap ring.
12. Route the upper belt around the clutch
sprockets.
Flexonic Belt
Clutch
Set Screws (2),
torque to
60-80 in-lbs
(6.8-9.0 Nm)
Alternator
Belt
Clutch
Sprocket
Snap
Ring
Thrust
Washer
Hardened
Washer
Clutch Shaft Pulley
Scribe here
Tension
Bracket
Tensioning
Bolt