Lifan X60, Руководство по обслуживанию

Страница: 63 / 839

LIFAN X60 Service Manual
Working principle
A Delphi pencil ignition coil is only for a cylinder. Under the control of the ECM, the
primary coil should be charged to save magnetic energy, the secondary coil winding
should sense high voltage, so as to make the spark plug connected to the coil spark over
and orderly control the output high voltage energy from the ignition coil of each cylinder
to the spark plug.
Delphi pencil ignition coil is connected with the engine control parts on the vehicle, so as
to control ignition time, dwell time and spark progress. The ignition function is carried out
along with the current of the primary coil in the electronic ignition system flowing to the
integrated coil. The switch will be controlled by the electronic spark timing signal from
the pulse code modulation. When the electronic spark timing signal falls to or below a
specific critical voltage level, the primary current will be cut off to make the electricity
rotate from the primary winding to the secondary winding. The electricity generated in the
secondary winding will be directly transmitted to the spark plug.
Technical parameters:
Voltage range 6
～
16V
Primary charging time 2.15msec
Primary operating current
peak
7.5Amp
Minimum ignition
duration
1.0ms
Minimum ignition energy 35mJ
Connection terminals
1 -ignition switch power positive, GND-ground wire, and 3-to
ignition module (inserted into the ECM).
62
mashinesoft.com
09120146259