Lifan PRO LF4000-CA, Инструкция по эксплуатации и руководство пользователя

Страница: 40 / 80

39
Maintenance
MAINTENANCESCHEDULE
PROCEDURE TIME
Engine OilCheck EachUse
Replace Engine Oil After Each 40 Hours of Use (For Initial Breakin – After
First (1st) 10 Hours ofUse
Air Cleaner FilterCheck EachUse
Air Cleaner FilterReplacement When Needed or After Every 50 Hoursof Use
Air CleanerWash WhenNeeded
Spark Plug When necessary or within 100 hrs of run time
ValveClearance
Check&Re--
‐
adjust annually or after300 Hours of Use
Fuel Tank Replace Every 3 Years Based on Condition
NOTE: Refer to Following Procedures for Proper Method to PerformMaintenance
OIL CHANGE PROCEDURES:
Refer to Controls and Feature section fordiagram. Periodic Maintenance of your
engine oil should be performed after each 40 hoursof use of you Power Equipment Product. Check your engine
oil level prior to eachuse.
1. Start your engine and let it warm up to get the oil warm and thinner. Turn theengine On/OFF switch to
the “OFF” position. Turn Fuel Valve to the“OFF” position.
2. Remove the oil cap/dipstick by turning counter clockwise. Remove the oil drain plug located below the oil
cap/dipstick utilizing the appropriate tools.
USE CAUTION: THE OIL MAY BEHOT.
3. Drain the engine oil into an approved receptacle and discard in accordancewith all Federal and State
Regulations. Never dump the used engine oil on theground or into drains, only discard in an approved
manner. Check with your local authorities to determine the regulations in yourarea.