LIFAN	 Power USA LF3TWP9 Скачать руководство пользователя страница 8

   

LIFAN   Power   USA   

2205   Industrial   Park   Road   

Van   Buren,   AR   72956   

866-­‐471-­‐7464   

www.lifanpowerusa.com   

8   

Safety   Instructions   

(continued)   

   

WARNING!

   

   

While   engine   is   running   temperature   may   exceed   150°F   (65°C).   
Server   burns   may   occur.   

   

Exhaust   heat/gasses   can   ignite   combustibles,   structures   or   damage   fuel   tank   causing   a   
fire.

   

   

 

Do   NOT   touch   hot   surfaces   and   do   avoid   exhaust   gasses.   

 

Allow   water   pump   to   cool   before   touching.   

 

Keep   at   least   6   ft.   (183cm)   clearance   on   all   sides   of   water   pump   including   overhead   clear.   

 

Reflective   exhaust   heat   may   damage   fuel   tank   causing   fire.   

 

Code   of   Federal   Regulation(CFR)   Title   36   Parks,   Forests,   and   Public   Property   require   equipment   powered   by   an   internal   combustion   
engine   to   have   a   spark   arrester,   maintained   in   working   order,   complying   to   USDA   Forest   service   standard   5100-­‐1c   or   later   revision.   
In   the   state   of   California   a   spark   arrester   is   required   under   section   4442   of   the   California   Public   resources   code.   

WARNING!

   

   

Unintentional   sparking   can   result   in   fire   or   electrical   

shock.

   

   

WHEN   TESTING   FOR   ENGINE   SPARK   

 

Do   NOT   check   for   spark   with   the   spark   plug   removed.   

 

Use   approved   spark   plug   tester.

   

WHEN   REPAIRING   OR   ADJUSTING   WATER   PUMP   

 

Disconnect   the   spark   plug   wire   from   the   spark   plug   and   place   the   wire   where   it   cannot   contact   spark   plug.      

   

CAUTION!

   

Improper   use   and   care   of   this   water   pump   will   cause   damage   and   shorten   its   lifespan.   Failure   to   follow   these   actions   will   void   

all   warranties.

   

 

Use   water   pump   only   for   appropriate   and   designated   purposes.   

 

The   dealer   or   customer   helpline   (1-­‐866-­‐471-­‐7464)   can   instruct   you   on   intended   uses.   

 

Water   pump   must   be   placed   on   a   level   surface.   

 

Do   NOT   expose   water   pump   to   extreme   conditions.   Excessive   dust,   moisture,   and   corrosive   vapors   will   damage   unit.   

 

Cooling   slots   must   be   kept   clear   of   debris.   

 

Shut   off   water   pump   and   take   to   a   qualified   service   center   if   the   water   pump   fails   to   operate   properly.   

   

   

NOTE:   Pumping   of   inflammable   or   corrosive   liquids,   such   as   gasoline,   seawater,   
chemical   solutions,   alkaline   liquids,   or   acids,   is   forbidden   with   this   unit!   

   
   

Содержание LF3TWP9































Отзывы: