LIFAN Power USA
2205 Industrial Park Road
Van Buren, AR 72956
866-‐471-‐7464
www.lifanpowerusa.com
8
Safety Instructions
(continued)
CAUTION!
Excessively high operating speeds (engine revolutions) increase the risk of injury and damage to the engine.
Excessively low speeds impose a heavy load and will damage engine.
•
Do NOT adjust engine speed governor.
•
Modifying engine in any way may be dangerous and will void warranty.
WARNING!
While engine is running temperature may exceed 150°F (65°C).
Server burns may occur.
Exhaust heat/gasses can ignite combustibles, structures or damage fuel tank causing a
fire.
•
Do NOT touch hot surfaces and do avoid exhaust gasses.
•
Allow engine to cool before touching.
•
Keep at least 6 ft. (183cm) clearance on all sides of engine including overhead clear.
•
Reflective exhaust heat may damage fuel tank causing fire.
•
Code of Federal Regulation(CFR) Title 36 Parks, Forests, and Public Property require equipment powered by an internal combustion
engine to have a spark arrester, maintained in working order, complying to USDA Forest service standard 5100-‐1c or later revision.
In the state of California a spark arrester is required under section 4442 of the California Public resources code.
WARNING!
Unintentional sparking can result in fire or electrical
shock.
WHEN TESTING FOR ENGINE SPARK
•
Do NOT check for spark with the spark plug removed.
•
Use approved spark plug tester.
WHEN REPAIRING OR ADJUSTING ENGINE
•
Disconnect the spark plug wire from the spark plug and place the wire where it cannot contact spark plug.
