Electric motor
The outside of the electric motor can be cleaned with a damp cloth. The inside of the
motor is recommended to be cleaned with compressed air. This is done by blowing
the compressed air to the air inlet of the motor.
Electrical connections
ONLY an authorized electrician can do the electrical connections and other electrical
installations. However, it is good to visually ensure that the connections are tight and
the wirings are in order.
Cleaning shaft
The cleaning shaft must be cleaned every time after use. The dirt and grease that has
collected to the plastic surface can be removed with a mild grease removal detergent
that is meant for plastic surfaces. Some lubricant (synthetic Vaseline, lubricating oil
etc.) must be put between the turnbuckle and the outer bearing in the brush adapter
regularly.
Liquid nozzles (only LIFA SC25 Multi): After use, the nozzles and the hoses should
be rinsed with water so they will not get blocked and there will be no residues of old
detergents. Corrosive detergents and solvent substances may eat into the hose.
After rinsing the hose should be run clean with compressed air.
NOTE!
Possible repairs must be carried out by the manufacturer or a servicer authorized
by Lifa Air Oy Ltd. Third party repairs will void the warranty
.
11
