Maintenance
2
4
11
1
3
5
FILTER
4%
FILTER
RESET?
Press and hold
FILTER
100%
Press and hold
Confirm to reset?
Reset
12
Troubleshooting
Specifications
• Please check if the DC power source/control connector is connected to the purifier main unit correctly.
• Please check that the controller is fully inserted into the power socket.
• Please check if the purifier is at minimum wind speed.
How to do if the product stops working
Product Name: Smart Car Air Purifier
Product model: LAC52
Clean Air Delivery Rate for particle (CADR particulate matter): 52m
3
/h (Performance data above are in accordance with
GB/T18801-2015 tested by third-party laboratories using particular soot particles or gaseous pollutants as targeted pollutants.)
Working voltage: DC12V-14.4V
Maximum power: 7W
Filter model: LAD 01 LA
Customer Service – International
if you have any questions regarding the care and operations of your LIFAair air purifier, kindly contact us at
[email protected] or visit us at www.lifaair.com
Please note that we reserve the right to change or modify our product without prior notice.
English
English
English
NOTE: Above diagrams are for reference only, please prevail in kind.
Filter replacement
(be sure the main unit is off and disconnected)
1. Filter replacement is required once filter lifespan is below 5%.
2. Remove top cover of the main unit and used filter(s). Replace new filter(s) and secure the top cover.
3. Refer to controller operation to reset filter lifespan calculation.
Open the net cover of purifier main unit
Take out the filter from purifier main unit
Install the new filter into the purifier main unit, the arrow
indicating airflow should be pointed downwards.
Complete the filter installation, close the net cover of purifier main
unit and tighten it.
Under FILTER mode, press and hold to initiate
“RESET?” prompt. Press and hold again to reset.