Before use
User Manual
Data Video Projector
2
Before use – Please read the user manual
The following notes are intended to be a help for handling the product in accordance
with its designated purpose.
Attention:
A person could be killed or injured if the wrong operation is done by ignoring this indication.
__________________________________________________________________
Do not install this unit
in an unstable place.
Avoid placing it in an unstable place such as a weak base, an inclined floor, etc. This may cause the
projector to drop or fall over, resulting in injury.
Do not remodel
this unit.
Do not remodel this unit. It may cause a fire, an electric shock, etc.
Never use
the projector in a humid
environment.
Never use the projector in a humid environment, e.g. bathroom or close to cookers or humidifiers. This
could cause a fire, an electric shock, etc.
Only connect
to the specified mains voltage.
The projector must only be operated with the alternating current specified on the identification plate.
Please immediately check whether the supplied mains connection cable coincides with wall outlets at
the installation location.
Do not forget
the protective conductors.
Only use extension leads or cables with a minimum cross-section of 1.5 mm² and protective conduc-
tors.
Do not apply any shock.
If you drop this unit or if the casing is broken, turn off the power switch, disconnect the power plug and
contact your dealer. If you use it as it is, it may cause a fire, an electric shock, etc.