USER’S MANUAL
2-2
The On Screen Display (OSD) Menu is a configuration
program built into your projector and allows you to easily
configure and change the settings.
It contains manufacture default settings for the
projector’s standard operations. However, there are
occasions when you need to be required to modify the
default settings. For example, you may need to
activate the OSD menu when the input sources change,
or when you decide to customize the settings to suite
your own specific needs.
OSD Menu
You may activate the OSD menu by pressing the “Menu”
button either on the panel control of the projector or the
remote control. (More info, refer to Sec. 1)
Status Signals
Power on
The splash screen will be displayed in
10-15 seconds upon power-on.
Power off
The pup-up screen will be displayed for 6
sec. requesting power off confirmation.
Input Source
To select your input source signal, press
“Source” button on the top cover of the
projector or on the remote control. And
you will see the pop-up screen as shown.
Press “
bc
” or “Source” to select the
desired input source.
Press “Menu” to exit.
