Liemke KEILER-25 LRF, Руководство по эксплуатации

Страница: 28 / 37

20
–
21
E
N
12. LASER RANGING
FUNCTION
Laser Ranging Function
> Short press the
Up / Ranging button
(4) to switch
on the laser ranging function in the home screen .
> The laser cursor opens automatically, and the
tooltip
at the bottom of the screen displays
the current ranging mode and the distance of the
target indicated by the cursor.
> There are two kinds of ranging modes:
single ranging and continuous ranging
.
Press and hold the
Up / Ranging button
(4) to
switch between the two modes.
> In single ranging mode, short press the
Up / Ranging button (4) is required for ranging.
> In the continuous ranging mode, the distance of
the target indicated by the cursor will be refreshed
automatically every 1 second, without any
keystroke operation.
> Ranging range and accuracy is 600 m±1m, and it
will be affected by fog and heavy rain and other
weather.
> After the distance measurement is completed,
short press the
Power button
(6) to exit the laser
ranging function.
NOTE!
The product implements an
invisible laser beam. Please pay
attention to the following:
– Do not point the laser at eyes
– Do not point the laser at people
– Do not look into the laser with optical
devices
– Remove your finger from the measu-
ring button when you are not mea-
suring. This will prevent accidental
activation of the laser.
– DO NOT disassemble, alter or repair
the binoculars yourself.
– The laser can be hazardous to your
health.
WARNING!
This product has been tested to
meet the following standards:
CLASS 1 LASER PRODUCT.
INVISIBLE LASER RADIATION.
NEVER LOOK WITH OPTICAL DEVICES
INTO THE LASER (BINOCULARS,
TELESCOPES).
This device complies with the regula-
tions for laser class 1 in accordance
with applicable standards
IEC 60825-1:2007 Edition 2 (TÜV SÜD,
EN 60825-1:2007 and CE according to
EN 61326-1:2013.