Liebert PowerSure Personal XT 1250 VA Скачать руководство пользователя страница 2

2

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

This manual contains important safety instructions that should be followed during
the  installation  and  maintenance  of  the  UPS  and  its  batteries.  Please  read  this
manual thoroughly before attempting to install or operate this UPS.

This  equipment  can  be  installed  and  operated  by  individuals  without  previous
training.

1.

PowerSure Personal XT models are available for 230VAC supply voltages and 
loads.  Please  verify  that  this  model  matches  your  AC  mains/  load  voltage
requirements.

2.

This  equipment  is  designed  for  Commercial/Industrial  use  only.  Liebert
Corporation  neither  recommends  nor  knowingly  sells  this  product  for  use  in
critical life support applications.

3.

The PowerSure Personal XT 230VAC models are not supplied with an input
power  lead  for  connection  to  the  mains  supply.  Use  the  input  mains  power
lead from your data processing equipment to connect the UPS to the mains
supply.  The  UPS  is  supplied  with  two  output  power  leads  with  moulded
connectors  to  connect  from  the  UPS  output  to  your  equipment.  Additional
input/output leads can be obtained from your dealer.
Also  provided  is  a  Liebert  special  interconnection  cable  for  connection  to
DB9  connector  on  the  rear  of  the  UPS  for  use  with  Liebert's  SiteNet
MultiLink® software  (see  user  manual  for  details)  DO  NOT USE  FOR
OTHER APPLICATIONS.  Store in safe place if not required at this time. 

4.

This  UPS  must  be  earthed  at  all  times  during  operation.  Connect  only  to  a
mains supply socket outlet with an earth connection. A means of disconnection of
the mains supply should be within 2  metres of the UPS. 

5.

WARNING: Output receptacles on the UPS are electrically live if the UPS is
switched  ON,  even  if  the  UPS  is  not  plugged  in  to  a  mains  supply.  The
On/Off  button  on  the  UPS  does  not  electrically  isolate  the  internal  parts. To
isolate the UPS, switch OFF the UPS first, then unplug it from the mains.

.

To  reduce  the  risk  of  electric  shock,  do  not  remove  the  cover,  as  it  has  no
user-serviceable  parts  inside.    Some  components  are  live,  even  when  AC
power is disconnected.  For service, contact a qualified technician.

.

To reduce the risk of fire, use the proper rating when replacing the fuse.

.

To prevent the risk of fire or electric shock, install the UPS in a temperature
and humidity controlled room, free of conductive contaminants.

6.

Your  total  load  earth  leakage  current  must  not  exceed  3.5  milli-amperes.
Most data processing equipment meets this requirement if you use no more
than 2 pieces of equipment. For further advice contact your dealer.

7.

The UPS relies on your building wiring overcurrent protection, which must be
rated between 10-20 amperes.

8.

When  using  the  communication  features  on  the  UPS,  ensure  the  cabling
connected  to  the  DB9  communication  port  or  the  network  connection  are
kept separated by 25mm from the power leads to the UPS input and output.

Содержание PowerSure Personal XT 1250 VA













Отзывы: