Liebert OpenComms Web Card, Руководство пользователя

Страница: 26 / 32

SNMP
Clicking on the SNMP folder allows you to enable authentication traps.
Clicking on the Access or Traps folder allows you to configure the devices
you want to have access to the card via SNMP and devices you want to
receive traps from the card. The Access folder is shown below:
As you are adding communities, you need to consider access rights.
Notice above, that 126.4.1.100 has write access when the device passes
the correct Community String of MyCommunity. This means that this net-
work device has both read and write access to the card, whereas
126.4.1.200 has only the ability to read information when providing the
correct Community String. Devices with write access can control the UPS
and reconfigure settings of the card. In order for a device you have added
to the Access folder to also receive notification from the card via SNMP
Traps for UPS alarms and condition changed, you also need to add the
device toe the Traps folder.
Users
Clicking on the Users folder allows you to edit the Username or Password
that must both be entered correctly to control the UPS or change configu-
ration settings of the card from the Web.
The factory default User Name is Liebert and the Password is Liebert.
Because this is a well-known username and password, you should
change it as soon as possible. You can also change the Username or
Password from the Web.
From the Web, you need to know the current Username of Password to
make a change.
Web
Clicking on the Web folder allows you to modify the Web browser refresh
rate. Due to the static nature of the Web, the card instructs your Web
browser to refresh many areas of the card's web page at a specific inter-
val.